Raspberry BASIC

Raspberry BASIC => Interpreters => ScriptBasic => Topic started by: John Spikowski on April 13, 2023, 08:03:03 AM

Title: Amazon Sidewalk
Post by: John Spikowski on April 13, 2023, 08:03:03 AM

I was just notified by the Amazon Sidewalk (https://sidewalk.amazon/testkit) support group that my test kit is on the way. Time to dust off my RPi's and brush up on the GPIO bus.

I may become more active on the forum once my test kit arrives.

Title: Re: Amazon Sidewalk
Post by: John Spikowski on April 13, 2023, 08:27:42 AM

Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow the System CPU application to control the Sensor Controller and exchange data.

Title: Re: Amazon Sidewalk
Post by: John Spikowski on April 18, 2023, 05:31:49 PM

I received my Amazon Sidewalk test kit on Monday. The test kit shows bridge devices (Alexa / Ring doorbells) in my area. (green dots) I'm just getting started looking at the developer API. The test kit device is about the size of a Bic lighter. The idea is to take it with you when you drive around to see the Sidewalk network connectivity.

(https://sbqbo.org/pics/testkitmap.png)

(https://sbqbo.org/pics/tkpackets.png)

(https://sbqbo.org/pics/tkdata.png)

Title: Re: Amazon Sidewalk
Post by: John Spikowski on May 01, 2023, 07:19:36 PM

Here is article about Amazon Sidewalk.

https://hackaday.com/2023/05/01/your-guide-to-using-amazons-sidewalk-network-for-the-internet-of-things/