Raspberry BASIC

Author Topic: Amazon Sidewalk  (Read 3555 times)

John Spikowski

  • Moderator
  • *****
  • Posts: 234
    • View Profile
    • ScriptBasic
Amazon Sidewalk
« on: April 13, 2023, 08:03:03 AM »
I was just notified by the Amazon Sidewalk support group that my test kit is on the way. Time to dust off my RPi's and brush up on the GPIO bus.

I may become more active on the forum once my test kit arrives.
« Last Edit: April 13, 2023, 08:05:43 AM by John Spikowski »
ScriptBasic Project Manager/Facilitator

John Spikowski

  • Moderator
  • *****
  • Posts: 234
    • View Profile
    • ScriptBasic
Re: Amazon Sidewalk
« Reply #1 on: April 13, 2023, 08:27:42 AM »
Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow the System CPU application to control the Sensor Controller and exchange data.
ScriptBasic Project Manager/Facilitator

John Spikowski

  • Moderator
  • *****
  • Posts: 234
    • View Profile
    • ScriptBasic
Re: Amazon Sidewalk
« Reply #2 on: April 18, 2023, 05:31:49 PM »
I received my Amazon Sidewalk test kit on Monday. The test kit shows bridge devices (Alexa / Ring doorbells) in my area. (green dots) I'm just getting started looking at the developer API. The test kit device is about the size of a Bic lighter. The idea is to take it with you when you drive around to see the Sidewalk network connectivity.








ScriptBasic Project Manager/Facilitator

John Spikowski

  • Moderator
  • *****
  • Posts: 234
    • View Profile
    • ScriptBasic
Re: Amazon Sidewalk
« Reply #3 on: May 01, 2023, 07:19:36 PM »
ScriptBasic Project Manager/Facilitator